Da
www.worldtempus.comHWM - Magnus watchIts precision balance, the special mechanisms for fine regulation of the escapement, the balance cock and even the balance wheel are completely unique. This design is available in two variants — while the dial of the Magnus Contemporaine shows a perfectly executed interplay of space and volume, the Magnus Classic reflects the business-like finesse of the watch.
Main characteriscticsType: 3-hand watch
Hands: Hours/minutes/small seconds (at 6 o'clock)
Technical features- Independant manufacture Calibre: Cal. 800
- 3 patents pending
- Fully hardened parts
- 100% Swiss Made
CasingDesign: Eric Giroud
Casing variants:
- Polished/satinised steel
- White gold or red gold (Classic only)
Waterproof to: 50 m
Length over strap-holding bridges: 53.10 mm
Casing diameter: 42.50 mm
Casing height, total: 13.05 mm
Casing height, without crystal: 10.30 mm
Crystal: Domed sapphire glass
Casing back crystal: Flat sapphire glass
DialDesign: Eric Giroud
Shock resistance: Dial positioned by means of pins, screwed directly onto the movement
Dial variants: Magnus Classic
- Brass/tracery: blue (steel casing)
- Gold, with gold applications/tracery: anthracite (gold casing)
Magnus Contemporaine
-Brass, with brass applications
Hands: Hardened steel
Bracelet: Leather/alligator, with pin buckle
Bracelet size: Strap-holding bridges: 22 mm/buckle: 20 mm
MovementCalibre n°: HWM Cal. 800
Diameter: 38.30 mm
Height: 6.10 mm
Jewels: 33
Escapement type: Swiss lever escapement; capillary phase to improve oil retention
Balance: Mass-regulated Vivax balance/16 mm/patent pending
Balance spring: Over-coil hairspring (Breguet)
Fine regulation: Tenere fine adjustment/patent pending
Semi-oscillations: 18 000/h
Mainspring barrel diameter: 17.40 mm
Moment of inertia: 126 mgmm²
Gear trainGear tooth system: Cycloid gear teeth
Pinions: Fully hardened steel pinions
Gears: Copper beryllium
Mainspring barrel: Copper beryllium
Screws: Steel, blued and polished
Power reserve: 50h
DecorationMovement plates: Diamante bevelled
HWM - Tensus watchWith more than 300 individual parts, winding reserve indicator, a precision balance, special twin mainspring barrels and a triple escape mechanism with dual escape wheel and constant power, it is a true masterpiece of the art of horology. The Tensus is the perfect watch for everyone who is not only captivated by the intricate mechanisms; it is also, with its exquisite embellishments, an exclusive understatement.
Main characteristicsType: 4-hand watch (including power reserve)
Hands: Hours / minutes / small seconds (at 6 o’clock), power reserve (at 9 o’clock)
Technical features- Independent manufacture Calibre: Cal. 880
- 5 patents pending
- Fully hardened parts
- 100 % Swiss Made
CasingDesign: Eric Giroud
Casing variants:
- Polished/satinised steel
- White gold or red gold
Waterproof to: 50 m
Length over strap-holding bridges: 53.10 mm
Casing diameter: 42.50 mm
Casing height, total: 13.95 mm
Casing height, without crystal: 11.20 mm
Crystal: Domed sapphire glass
Casing back crystal: Flat sapphire glass
DialDesign: Eric Giroud
Shock resistance: Dial positioned by means of pins, screwed directly onto the movement
Dial variants:
- Brass, with brass applications / tracery: blue (steel casing)
- Gold, with gold applications / tracery: anthracite (gold casing)
Hands: Hardened steel
Bracelet: Leather / alligator, with pin buckle
Bracelet size: Strap-holding bridge: 22 mm / buckle: 20 mm
MovementCalibre n°: HWM Cal. 880
Diameter: 38.30 mm
Height: 7.00 mm
Jewels: 55
Escapement type: Sequax triple anchor escapement with double escape wheel and constant power / patent pending; capillary phase to improve oil retention
Balance: Mass-regulated Vivax balance / 16 mm / patent pending
Balance spring: Over-coil hairspring (Breguet)
Fine regulation: Tenere fine adjustment / patent pending
Mainspring barrel: Pariter twin mainspring barrel / patent pending
Semi-oscillations: 18 000/h
Mainspring barrel diameter: 17.40 mm
Moment of inertia: 126 mgmm²
Gear trainGear tooth system: Cycloid gear teeth
Pinions: Fully hardened steel pinions
Gears: Copper beryllium
Mainspring barrel: Copper beryllium
Screws: Steel, blued and polished
Power reserve: 60 h
Decoration
Movement plates: Hand bevelled