Immagine:
56,73 KB_SPECIFICATIONS OF THE TOURBILLON ORBITAL_
_MOVEMENT_
Calibre IO200, manually wound rotating movement with off-center flying tourbillon,
exclusive watchmaking ball-bearing system with triple rotation within one single block,
moon-phase display in the back and power-reserve indicator on the side.
Vertical winding and setting through the center of the movement from the back.
_DIMENSIONS_
33mm x 10.4mm (14 1/2 lignes).
_BEARINGS_
4 ball-bearing races, 14 jewel bearings.
_NO. OF PARTS_
215
_TOURBILLON_
One-minute flying tourbillon (one-hour movement rotation),
balance with adjusting screws on a flat spring,
balance frequency of 21’600 a/h, central ball-bearing system.
_BASE CALIBRE_
Double ball-bearing with slow rotation,
thermostatic, one rigid plate and two mobile plates,
mainspring barrel and going train rotate around the central ball-bearing system,
limited radial balance.
Alignment mainspring barrel – center – flying tourbillon.
_INDICATIONS_
Hours and minutes, seconds on the tourbillon,
power reserve, moon phases.
_POWER RESERVE_
Approximately 110 hours,
indicator located in the caseband (linear reading system with gauge).
_MOON PHASE_
Located in the caseback at 9 o’clock,
precision of 29,5 days, lacquered golden disc.
_RAPID PUSH BUTTON_
Located in the caseback at 6 o’clock,
manual push-piece to set the moon.
_WINDING SYSTEM_
Located vertically in the caseback at 3 o’clock,
two position winder (folding key).
_CASE_
In 18k rose gold, white gold or platinum with matching buckle.
Two windows in the caseband.
Fir-tree engine-turned back.
_DIMENSIONS_
45mm x 15.30mm.
_GLASS_
Non-reflecting domed sapphire crystal.
Two domed sapphire crystals in the caseband,
one domed sapphire crystal in the caseback.
_WATER RESISTANCE_
3 ATM (30 metres).
_DIAL_
In 18k gold.
_HANDS_
In 18k gold,
“Skyscraper” style.
3 Risposte
656 Visite