Orologico Forum 3.0

Habring new

Airangel

  • *****
  • 48907
  • Spambuster
    • Mostra profilo
Habring new
« il: Settembre 10, 2009, 09:39:18 am »
Autumn 2009 – what a memorable time for the world’s probably smallest watch manufacturer: Exactly 5 years after the presentation of their very first model Habring²

celebrates it’s successor: The name is program – Time Only – hours, minutes, seconds – nothing else!

 

30mm diameter and a height of 4,6mm or 6.6mm are the vital figures of the new movement. The different heights standing for the manually wound version (A09M) and automatically wound version (A09) which are available for the same price. The A09 calibre family replaces the formerly used ETA 6498-1 in the Habring² movement range.

 

With this new movement Habring² is celebrating the next milestone on the way to their very own manufacture movement without leaving their well known price-value ratio. While their current movement families A07 (jumping seconds) and A08 (chronographs) already carry major modifications and detailed refinements the new A09 tops them with it’s in-house developed bidirectional automatic winding system which sets new benchmarks in efficiency, reliability and comfort.

 

It supplies the energy to the same train gears as in the sister calibres A07 and A08 – enough for 48 hours of autonomy. The escapement and balance are in chronometer quality with Triovis-regulation system and stop seconds completing – as usual – the technical data.

 

Although a different size, a visual similarity to ETA's successful “Valgranges” caliber family can not be denied. Nevertheless the Habring² A09 is a completely new design. One of the main emphasis of the development was to increase the ease of service. In comparison to the well known ETA-design Habring’s solution foresees the ability to remove the entire automatic winding module within seconds, to access the basic movement whenever necessary.

 

While the production of most of the components is subcontracted to swiss and german specialists, the finishing, assembling and fine tuning are of course carried out at the Völkermarkt based atelier looking over mountains and lakes.

 

A worthy base price model of a small watch manufacturer who’s production hardly reaches 50 pieces per year. The new Time Only is available in several dial versions.

For further information, please contact us by phone: +43 4232 51300, or online: www.habring.com

Specification: Habring² - Time Only 2009

 

Case:

·        Screwed stainless steel watchcase made of three parts with 42mm diameter

·        Waterprotected equivalent 50 meter depth

·        Spherical domed and double sided antireflective coated sapphire crystal

·        Solid double sealed stainless steel crown, sapphire crystal back

·        Individually engraved serial number 01 - 200X till 12 - 200X (year of production) between

·        the lugs at 6 o’clock,

 

Dial/hands:

• Silver, copper, galvanic blue or galvanic black plated metal dial, custom dials on request

• Gold plated or rhodiated applied numerals, hour markers and hands;

 

Movement A09 and A09M:

·        Exclusive manufactory movement based on the ETA-„Valgranges“ train gear, bridges from in-house production

·        diameter 30mm, movement height 6,6mm (A09) or 4,6mm (A09M)

·        Indication of hours, minutes and small seconds at 9h

·        manually wound (A09M) or in-house developed bidirectionary automatic winding system (A09)

·        Triovis regulation system

·        Escapement parts in chronometer quality

·        Shockprotected according DIN and NIHS

·        24 jewels (A09) or 17 jewels (A09M)

·        Power reserve after being fully wound: approx. 48 hours

·        64 (A09) or 57 (A09M) maintenance relevant parts

 

straps/packing:

·        Various straps of leather or microfibre material

·        Stainless steel bracelet on request

·        Handmade three-part wooden box made from brushed and oiled Oregon-pine with integrated spare part compartment with a set of spares

·        Travel pouch with integrated spare strap on request

·        Certificate/warranty card


Immagine:

51,27 KB


Immagine:

41,39 KB


Immagine:

67,59 KB


Immagine:

64,88 KB


Immagine:

73,43 KB

Teo

  • *****
  • 7909
    • Mostra profilo
    • E-mail
Habring new
« Risposta #1 il: Settembre 10, 2009, 09:42:14 am »
Semplice ed elegante, non mi piace molto però il quadrante mi ricorda un po' quelle vecchie finestre di alluminio annodizzato.

Matteo

Bertroo

  • *****
  • 33982
    • Mostra profilo
Habring new
« Risposta #2 il: Settembre 10, 2009, 13:13:50 pm »
Nun me pias!

gidi_34

Habring new
« Risposta #3 il: Settembre 10, 2009, 14:00:56 pm »
non mi piace il colore del quadrante...cmq noto con piacere che molti stanno riproponendo delle linee un po più soft...magari dopo la sbornia di oversize...

Elen

  • *****
  • 2039
    • Mostra profilo
    • E-mail
Habring new
« Risposta #4 il: Settembre 10, 2009, 15:21:04 pm »
sobrio e di classe..
[:p]
Facciamo si che il miglior Amico dell'uomo,abbia nell'uomo il suo migliore Amico.

Andrea80

  • *****
  • 20054
  • Deluso ma non Illuso...
    • Mostra profilo
Habring new
« Risposta #5 il: Settembre 10, 2009, 17:34:18 pm »
calatrava-dorn???!!!
[xx(]

L'onore dipende spesso dall'ora che segna l'orologio - Guillaume Apollinaire

caludio

  • *****
  • 3425
    • Mostra profilo
    • E-mail
Habring new
« Risposta #6 il: Settembre 10, 2009, 19:30:09 pm »
Carini, si fanno loro il movimento quindi? ma quanto costano?

Claudio

Patrizio

  • *****
  • 15856
  • Homo sapiens non urinat in ventum
    • MSN Messenger - patmonfa@hotmail.com
    • Mostra profilo
    • E-mail
Habring new
« Risposta #7 il: Settembre 10, 2009, 19:55:08 pm »
mi pare di avere letto 1950
- Homo sapiens non urinat in ventum -


belloriccoefamoso

  • *****
  • 8151
  • si fossi foco arderei lo mondo...
    • Mostra profilo
    • E-mail
Habring new
« Risposta #8 il: Settembre 10, 2009, 20:31:57 pm »
mi sembra come che il quadrante debba essere... finito...
sembra che lo abbiano lasciato al grezzo per una successiva lavorazione...
non lo prenderei mai cosi'

Habring new
« Risposta #9 il: Settembre 10, 2009, 20:36:16 pm »
Scusate, può essere che io sia cecato, ma non trovo il diametro della cassa; se ho letto bene, 30 mm. dovrebbe essere il diametro del movimento, ma il modello in foto, che diametro cassa ha? Sarà mica un 45 o giù di lì, spero! Lo vedrei benino se fosse max un 38 mm.[:D][;)]

fabri5.5

  • *****
  • 12287
    • Mostra profilo
    • E-mail
Habring new
« Risposta #10 il: Settembre 10, 2009, 22:40:50 pm »
mariol4749 ha scritto:

Scusate, può essere che io sia cecato, ma non trovo il diametro della cassa; se ho letto bene, 30 mm. dovrebbe essere il diametro del movimento, ma il modello in foto, che diametro cassa ha? Sarà mica un 45 o giù di lì, spero! Lo vedrei benino se fosse max un 38 mm.[:D][;)]

non mi pare ci siano le dimensioni dell'orologio.

Bertroo

  • *****
  • 33982
    • Mostra profilo
Habring new
« Risposta #11 il: Settembre 10, 2009, 23:59:01 pm »
Le dimensioni scritte sono del movimento....dalla foto sembra un 38-40.....

Habring new
« Risposta #12 il: Settembre 11, 2009, 01:21:26 am »
Case:
................42 mm diameter. Ciao[8D][8D]
La vita è come il cioccolato, è l'amaro che fa apprezzare il dolce.

                                                                  Xavier  Brebion

Airangel

  • *****
  • 48907
  • Spambuster
    • Mostra profilo
Habring new
« Risposta #13 il: Settembre 11, 2009, 09:34:14 am »
raffaele812 ha scritto:

Case:
................42 mm diameter. Ciao[8D][8D]


appunto, è un 42mm.